I always considered the tying Paraloop incomplete because, even if it highlight the entire body of imitation and provide it an awful lot rooster’s fibers support, cannot provide it vertical wings, key feature of the ephemeral. The only wings that we can insert in the tying are those of the spen Ver más...I always considered the tying Paraloop incomplete because, even if it highlight the entire body of imitation and provide it an awful lot rooster’s fibers support, cannot provide it vertical wings, key feature of the ephemeral. The only wings that we can insert in the tying are those of the spent, on which is reversed the hackle tied Paraloop.
I became interested in assembling Paraloop when I decided to find a way to provide it the wings.
I thought, that, for to put the wings in the tying, I had to tie them on the thread loop around which I wrap the hackle, therefore decided to use the Dropper knot, that I used for years in the sea fishing, which I know several practical applications.
With a nylon thread of 0.14 mm. in diameter, I tied the synthetic wings then I tied the hackle with the usual procedure Paraloop
After having tried in fishing different flies Paraloop with those wings, I have verified the effectiveness of the flies.
Deslice el cursor sobre la imagen para visualizar la mosca con zoom.
Deslice el dedo sobre la imagen para hacer zoom.
Listado de materiales
Hook TMC 100 size 14
Thread: Black 8/0
Tails: Gallo Pardo
body: stripped peacock quill
Hackle; rooster hackle
Wings: White yarn tied with Nylon monofilament 0,14 mm. in diameter
Pasos
Paso 1
I insert a tuft of yarn into a Dropper knot.
Paso 2
I clench the knot.
Paso 3
Here are the wings.
Paso 4
I tie the tails and body on a right hook.
Paso 5
I make a loop with the nylon thread, on which I tied the wings, and tie it on the hook
Paso 6
I hook the loop to the tool parachute
Paso 7
I tie a rooster hackle under the loop
Paso 8
I wrap the rooster hackle under the wings
Paso 9
I wrap the rooster hackle over the wings
Paso 10
I go back with the hackle and tie it on the hook.
Paso 11
I cut excess of hacle.
Paso 12
I take off the loop from the parachute tool and tie it close to the eye of the hook
Paso 13
I cut one of two thread of loop
Paso 14
I lift the nylon thread remained, move it back and tie the head of the fly over it. In this way I have the certainty that the nylon thread (that is slippery) will not slip away from the knot of head .
Paso 15
Cut the excess of the nylon thread
Paso 16
I take off the fly from the vice and establish the height of the wings with a cut.
